Pioneer Elite PureVision PRO 1110HD Скачать руководство пользователя страница 29

Страница: 29 / 120

Basic Operations

Press

POWER

on the Media Receiver.

• The STANDBY indicator on the Media Receiver

turns off and the one on the Plasma Display
flashes red.

Press

POWER

on the Plasma Display.

• The STANDBY indicator on the Plasma Display

turns off.

• You can also reverse steps 2 and 3.
• If you are not going to use this system for a long

period of time, be sure to remove the power cord
from the power outlet.

Turning off the power

Press

on the remote control unit or

STANDBY/ON

on the Plasma Display.

• The system enters the standby mode and the

image on the screen disappears.

• Both STANDBY indicators light up red.

• It is recommended to place the system into the

standby mode by pressing

on the remote

control unit. This allows the system to
automatically receive Electronic Program Guide
information signals in the standby mode.

Plasma Display/Media Receiver status indicators

Indicator Status

System Status

Plasma Display

Media Receiver

POWER ON

STANDBY

POWER ON

STANDBY

Power to the Plasma Display and Media Receiver is off. Or the power
cords have been disconnected.

Power to the system is on.

The system is in the standby mode.

Power to the Media Receiver is off. Or the power cord has been discon-
nected from the Media Receiver.

Power to the Plasma Display is off. Or the power cord has been discon-
nected from the Plasma Display.

For other than the above, see “Troubleshooting” on page 106.

Flashing

PDP-ELITE-Eng (28-37)

9/9/03, 11:44

Содержание Elite PureVision PRO 1110HD

























































































































Результаты поиска

Содержание Elite PureVision PRO 1110HD

Отзывы:

Похожие инструкции для Elite PureVision PRO 1110HD

Бренды по названию

Популярные бренды

Pioneer Elite PureVision PRO 1110HD, Руководство по эксплуатации

Результаты поиска

Содержание Elite PureVision PRO 1110HD

Отзывы:

Похожие инструкции для Elite PureVision PRO 1110HD

Бренды по названию

Популярные бренды