08
Basic Operations
37
En
1
Press
SPLIT
to select the display mode.
• Each time you press
SPLIT
, the display mode is
switched among 2-screen, picture-in-picture,
and single-screen.
2
When in the 2-screen or picture-in-picture mode,
press
/
to select a screen to be active.
• “
z
z
z
z
z
” appears on the active screen, which
outputs sound.
3
To select the desired input source, press the
appropriate input source button.
• If watching TV programs, press
CH
+
/
–
to
change the channel.
• The multiscreen function cannot display images from
the same input source at the same time. If you make
such an attempt, a warning message appears.
• When you press
HOME MENU
,
DTV GUIDE
, or
DTV INFO
, the single-screen mode is restored and
the corresponding menu is displayed.
Freezing images
Use the following procedure to capture and freeze one
frame from a moving image that you are watching.
1
Press
FREEZE
.
• A still image appears on the right screen while a
moving image is shown on the left screen.
2
Press
FREEZE
again to cancel the function.
• With the screen split, any image cannot be frozen.
• When this function is not available, a warning mes-
sage appears.
PDP-ELITE-Eng (28-37)
9/9/03, 11:44
37
