Pioneer DVR-550H-S - Multi-System DVD Recorder Скачать руководство пользователя страница 65

Страница: 65 / 142

Playback

Chapter 7

Playback

Introduction

Most of the features described in this
chapter make use of on-screen displays.
Navigate these using the cursor buttons and

ENTER

. To go back one level from any

screen, use the

RETURN

button.

Remember also that the button guide at the
bottom of every screen shows which buttons
do what.

Many of the functions covered in this
chapter apply to the HDD, DVD discs, Video
CDs, Super VCDs, WMA/MP3/DivX discs
and CDs, although the exact operation of
some varies slightly with the kind of disc
loaded.

¥ Many functions are not available when a

Video CD is playing in PBC mode. Start
playback from the Disc Navigator screen
for non-PBC playback (see

Using the

Disc Navigator with playback-only discs

on page 68).

¥ For discs that contain JPEG picture files,

see

The PhotoViewer

on page 100.

Basic playback

This section shows you how to use your
recorder for playback of discs (DVD, CD,
etc.), and for playback of video from the
HDD.

Important

¥ Throughout this manual, the term ÔDVDÕ

means any kind of playable or recordable
DVD. If a function is specific to a
particular kind of DVD disc, it is
specified.

¥ Some DVD-Video, DVD+R and

DVD+RW discs donÕt allow certain
playback controls to operate at certain
points in the disc. This is not a
malfunction.

Select the HDD or DVD for

playback.

If playing video from the HDD, skip to step

below.

Select DVD for any kind of disc playback.

[Front panel] Load a disc.

Load a disc with the label side facing up,
using the disc tray guide to align the disc (if
youÕre loading a double-sided DVD-Video
disc, load it with the side you want to play
face down).

¥ If you want to play a DTS audio CD,

please first read the note on page 65.

Start playback.

¥ If youÕre playing a DVD-Video or Video

CD, a disc menu may appear when you
start playback. Use the

///

buttons and

ENTER

to navigate DVD disc

menus, and the number buttons and

ENTER

for Video CD menus.

¥ When playing video from the HDD,

playback will automatically stop after the
end of a title is reached.

¥ There may be a slight pause when

playback switches from the first to the
second layer of a dual-layer disc.

¥ See the following sections for more

details on playing specific kinds of discs.

Press to stop playback.

When you’ve finished using the

recorder, eject the disc and switch the
recorder back into standby.

A L L

HDD/DVD

PLAY

STOP

07 Playback.fm 6 ページ２００７年１月６日　土曜日　午後７時５分

Downloaded From Disc-Player.com Pioneer Manuals

Playing CDs and WMA/MP3 discs

The table below shows the basic playback

controls for audio CDs

, and WMA/MP3

files.

Playing Video CD/Super VCDs

The table below shows the basic playback
controls for Video CD/Super VCDs.

Some discs feature Playback Control (PBC
for short) menus. These discs show PBC in
the display when you load them and display
a menu on-screen from where you can select

what to watch.

Press to skip to previous/next
chapter/title. (During playback
you can also use the front panel

CH +/–

buttons.)

During playback, enter a title
number then press

ENTER

skip directly to that title.
Press

CLEAR

to clear a number

entry and start again.

(Commercial back/skip) Each
press skips backward/forward
progressively up to a maximum
of two hours in either direction.

While paused, press and hold
to start slow-motion playback.
Press repeatedly to change the
playback speed.
While paused, press to advance
a single frame in either
direction.

Note

1 If you want to play a DTS audio CD, make sure the recorder is connected to a DTS-compatible amp/receiver with

a digital connection. Noise will be output through the analog outputs. Also make sure that

STEREO

is selected

using the

AUDIO

(

SHIFT

) button (see

Switching audio channels

on page 72).