Pioneer AVIC-Z610BT, Руководство по эксплуатации

Страница: 75 / 90

75
En
En
glis
h
The current password and password hint can be deleted.
1
Press .
2
Touch then .
3
Touch 1, followed by 2, and then touch 3 (page 74).
4
Touch [Clear Password].
5
Touch [Yes].
6
Touch [OK].
7
Enter the current password.
8
Touch [Go].
A message indicating that the security setting is cancelled appears.
You can restore settings or recorded content to the default settings from [Restore
Settings] in the [System] menu (page 63).
Deleting the password
Restoring this product to the default settings
If you have problems operating this
product, refer to this section. The most
common problems are listed below, along
with likely causes and solutions. If a
solution to your problem cannot be found
here, contact your dealer or the nearest
authorised Pioneer service facility.
A black screen is displayed, and
operation is not possible using the touch
panel keys.
→ [Power OFF] mode is on.
– Press any button on this product to
release the mode.
– Press and hold to release the rear
view camera screen and then change
the camera polarity setting to
[Battery].
CD or DVD playback is not possible.
→
The disc is inserted upside down.
– Insert the disc with the label upward.
→
The disc is dirty.
– Clean the disc.
→ The disc is cracked or otherwise
damaged.
– Insert a normal, round disc.
→ The files on the disc are in an irregular
file format.
– Check the file format.
→
The disc format cannot be played back.
– Replace the disc.
→ The loaded disc is a type this product
cannot play.
– Check what type of disc it is.
The screen is covered by a caution
message and the video cannot be shown.
→
The handbrake lead is not connected or
the handbrake is not applied.
– Connect the handbrake lead correctly,
and apply the handbrake.
→ The handbrake interlock is activated.
– Park your vehicle in a safe place and
apply the handbrake.
No video output from the connected
equipment.
→
The [AV Input] or [AUX Input] setting is
incorrect.
– Correct the settings.
The audio or video skips.
→
This product is not firmly secured.
– Secure this product firmly.
No sounds are produced. The volume
level will not rise.
→ Cables are not connected correctly.
– Connect the cables correctly.
→ The system is performing still, slow
motion, or frame-by-frame playback
with DVD-Video.
– There is no sound during still, slow
motion, or frame-by-frame playback
with DVD-Video.
→ The system is paused or performing fast
reverse or forwards during the disc
playback.
– For the media other than music CD
(CD-DA), there is no sound on fast
reverse or forwards.
Appendix
Troubleshooting
Common problems
Problems with the AV screen