Pioneer AVIC N2 - Navigation System With DVD player, Руководство по эксплуатации

Страница: 80 / 139

78
Chapter 6
Using the AV Source (Built-in DVD Drive and Radio)
AV
Advanced radio operation
(1) Function display
Shows the function names.
➲
How to display the FUNCTION menu
➞
Page 69
Storing and recalling broadcast
frequencies
If you touch any of the preset tuning keys P1
(PRESET 1) — P6 (PRESET 6) you can easily
store up to six broadcast frequencies for later
recall with the touch of a key.
1
When you find a frequency that you want
to store in memory keep touching a preset
tuning key P1 — P6 until the preset
number (e.g., P.ch: 1) stops flashing.
The number you have touched will flash in the
preset number indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
2
The next time you touch the same preset
tuning key P1 — P6 the radio station fre-
quency is recalled from memory.
When the touch panel keys are not displayed,
you can display them by touching the screen.
When
P1 — P6 are not displayed, you can
display them by touching DISP .
❒
Up to 18 FM stations, 6 for each of the
three FM bands, and 6 AM stations can be
stored in memory.
❒
You can also use and to recall radio
station frequencies assigned to preset tun-
ing keys
P1 — P6 .
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals for
good reception.
1
Touch “LOCAL” in the FUNCTION menu.
2
Touch “ON” to turn local seek tuning on.
To turn local seek tuning off, touch “ LOCAL ”.
3
Touch or to set the sensitivity.
There are four levels of sensitivity for FM and
two levels for AM:
FM: 1 — 2 — 3 — 4
AM: 1 — 2
The 4 setting allows reception of only the
strongest stations, while lower settings let you
receive progressively weaker stations.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automati-
cally store the six strongest broadcast frequen-
cies under preset tuning keys
P1 — P6 and once
stored there you can tune in to those frequencies
with the touch of a key.
1
Touch “BSM” in the FUNCTION menu.
2
Touch “START” to turn BSM on.
BSM
begins to flash. While BSM is flashing
the six strongest broadcast frequencies will
be stored under preset tuning keys
P1 — P6
in order of their signal strength. When fin-
ished,
BSM stops flashing.
To cancel the storage process, touch STOP .
❒
Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have saved using
P1 — P6 .
(1)
Preset tuning keys (P1 — P6)
RADIO