96
Chapter 8
Customizing the Audio Source Setting
AV
L+R
(Front speakers) —
R
(Front right
speaker) —
L
(Front left speaker)
Switching the 5.1ch setting
When the navigation unit is combined with the
multi-channel processor system (sold sepa-
rately), you can use the multi-channel sound.
Enter the following setting when combining the
multi-channel processor system.
• DO NOT enter this setting before you con-
nect the multi-channel processor system.
(If this setting is entered, the RCA will out-
put maximum volume for the multi-chan-
nel processor system.) Pioneer is not
responsible for any damage to the speaker
equipment caused by ignoring this warn-
ing.
1
Touch the source icon and then touch
“SOURCE OFF” to turn source off.
When the source icon is not displayed, you
can display it by touching the screen.
2
Turn the ACC OFF, and then turn it ON
again.
3
Press EQ button, and then without releas-
ing it press ANGLE (-) button.
4
Release ANGLE (-) button first, and then
release EQ button.
5
Touch “5.1ch” in the INITIAL menu.
If you touch “
5.1ch
”, it will be turned “
ON
”.
If you touch “
5.1ch
” again to turn “
OFF
” the
setting, “
5.1ch
” will disappear. If you want to
turn it “
ON
” again, you have to repeat the pro-
cedure from the Step1.
Other Functions
Setup adjustments
(1) Setup menu display
Shows the setup function names.
➲
How to display the
SETUP
menu
➞
Page 69
Setting the video input
You can switch the setting according to the con-
nected component.
• Select “
VIDEO
” to watch video of a connected
component as
AV
source.
• Select “
M-DVD
” to watch video of a connected
DVD player as
S-DVD
source.
1
Touch “AV INPUT” in the SETUP menu.
Each touch of the “
AV INPUT
” changes the
settings as follows:
•
OFF
— No video component is connected
•
VIDEO
— External video component
•
M-DVD
— DVD player connected with
RCA cable
When a DVD player is connected with an AV-
BUS cable, do not select “
M-DVD
” or else no
picture is displayed even if you select
S-DVD
.
Setting for rear view camera
The navigation unit features a function that auto-
matically switches to the rear camera image
(REAR VIEW CAMERA IN jack) when a rear cam-
era is installed on your vehicle. When the shift
lever is in REVERSE (R) position, the screen auto-
matically switches to a rear view camera. (For
more details, consult with your dealer.) You can
also use the camera as a rear view camera (
Rear
View
). In this case, you can see the image of the
rear view camera during normal driving. (The
navigation map screen can be displayed on the
right-hand side and the camera image can be
displayed on the left.) Please beware that in this
(1)
Other Functions
Содержание AVIC N2 - Navigation System With DVD player
Страница 20: ...18 ...
Страница 70: ...68 Chapter 5 Customizing Your Navigation System NAVI ...