1
Touch [FAD/BAL] in Audio Settings
menu.
The FAD/BAL screen appears. When
Rear SP
(the subwoofer controller setting in
System Settings
menu) is
Sub.W
,
Balance
will be displayed instead of
FAD/BAL
.
=
For details, refer to
Setting the rear output
and subwoofer controller
on page 136
2
Touch
a
or
b
to adjust front/rear
speaker balance.
Each time you touch
a
or
b
moves the front/
rear speaker balance towards the front or the
rear.
Front: 15
to
Rear: 15
is displayed as the front/
rear speaker balance moves from front to rear.
When the rear output setting is
Rear SP
Sub.W
, you cannot adjust front/rear speaker
balance.
=
For details, refer to
Setting the rear output
and subwoofer controller
on page 136
3
Touch
c
or
d
to adjust left/right speak-
er balance.
Each time you touch
c
or
d
moves the left/
right speaker balance towards the left or the
right.
Left: 9
to
Right: 9
is displayed as the left/right
speaker balance moves from left to right.
Using subwoofer output
This navigation system is equipped with a sub-
woofer output which can be turned on or off.
p
When the subwoofer output is on, you can
adjust the cut-off frequency, the output
level, and the phase of the subwoofer.
1
Touch [Sub Woofer] in Audio Settings
menu.
When
Preout
(the subwoofer controller set-
ting in
System Settings
menu) is
Full
, you
cannot select [
Sub Woofer
].
=
For details, refer to
Setting the rear output
and subwoofer controller
on page 136
2
Touch [On] to turn subwoofer output
on.
To turn subwoofer output off, touch [
Off
].
3
Touch [Reverse] or [Normal] to select
the phase of subwoofer output.
p
If subwoofer output sound is not clear with
[
Normal
], change it to [
Reverse
].
4
Touch
c
or
d
to select cut-off fre-
quency.
Each time you touch
c
or
d
selects cut-off fre-
quencies in the following order:
50
—
80
—
125
(Hz)
Only frequencies lower than those in the se-
lected range are output from the subwoofer.
5
Touch [+] or [-] to adjust the output
level of the subwoofer.
+6
to
-6
is displayed as the level is increased
or decreased.
Using non fading output
When the non fading output setting is on, the
audio signal does not pass through navigation
system
’
s low pass filter (for the subwoofer),
but is output through the RCA output.
1
Touch [Non Fading] in Audio Settings
menu.
Only when
Preout
(the subwoofer controller
setting in
System Settings
menu) is
Full
, you
can select [
Non Fading
].
=
For details, refer to
Setting the rear output
and subwoofer controller
on page 136
2
Touch [On] to turn non fading output
on.
To turn non fading output off, touch [
Off
].
Customising the Audio Setting related with Audio Visual
Engb
129
Chapter
15
Customising
the
Audio
Setting
related
with
Audio
Vi
sual
