=
For details, refer to
Correcting the installa-
tion angle
on this page
p
The navigation system can automatically
use its sensor memory based on the outer
dimensions of the tyres.
Correcting the installation angle
You can correct the installation angle of the
navigation system. Correcting the installation
angle improves the accuracy of sensor learn-
ing, even if the unit is not facing centre. Select
the orientation of the LCD panel from the left,
centre, and right.
1
Touch [Settings] in the navigation
menu, then touch [Hardware].
2
Touch [Installation Angle Setup].
3
Check the direction the LCD panel
faces, and touch the corresponding item.
[
Left
]:
Select this when the angle is 5° or more to the
left from the centre.
[
Centre
] (default):
Select this when the angle is less than 5° to
the left and right from the centre.
[
Right
]:
Select this when the angle is 5° or more to the
right from the centre.
p
If [
Learning Status
] in [
3D Calibration
Status
] is [
Simple Hybrid
], the installation
angle can be corrected.
Checking the device and
version information
1
Touch [Settings] in the navigation
menu, then touch [Hardware].
2
Touch [Service Info Screen].
3
Check the device and version informa-
tion.
Checking the hard disk
information
You can check the volume of the hard disk,
current used space and remaining space.
p
The hard disk space (%) means free space
of the music library. In some cases, even
when about 10 % of free space is left, no
more music tracks may be recorded due to
system restriction.
1
Touch [Settings] in the navigation
menu, then touch [Hardware].
2
Touch [Hard Disk Info].
Hard disk space (%)
Registering the Home Location
and Favourite Location
You can register one home location and one
favourite location. You can change the regis-
tered information later. You might find it useful
to register your workplace or a relative
’
s home
as your favourite location.
1
Touch [Settings] in the navigation
menu, then touch [Defined Locations].
Modifying the General Settings for Navigation Functions
Engb
81
Chapter
10
Modifying
the
General
Settings
for
Navigation
Functions