Pioneer Eclipse PE320AS, Руководство по эксплуатации

Страница: 31 / 84

CHOOSING AND USING THE BRUSHES
POLYPROPYLENE BRUSH (PPL)
Used on all types of floors. Good resistance to wear and tear, and hot water (no greater than 60°C). The Polypropylene brush is
n
s.
A
T y aggressive abrasives. It is used to clean very dirty floors. To avoid floor
dam only with the pressure strictly necessary.
THICKNESS OF THE BRISTLES
Thicker bristles are more rigid and are therefore used on smooth floors or floors with small joints.
On
p joints, it is advisable to use softer bristles which can enter the gaps more easily.
Remember that when the bristles are worn and therefore too short, they will become rigid and are no longer able to penetrate and
clean deep down. In this case, like with over-large bristles, the brush tends to jump.
PA
The pad holder is recommended for cleaning shiny surfaces.
Th
1
he traditional pad holder is fitted with a series of anchor points that allow the abrasive floor pad to be held and dragged while
working.
2 pe central locking system in plastic that
ecoming detached. This type of dragging
device is recommended above all for machines with more than one brush, where the centring of the abrasive discs is difficult.
TABLE FOR CHOOSING THE BRUSHES
Machine
No.
°
Code T
on-hygroscopic and therefore retains its characteristics even when working in wet condition
BRASIVE BRUSH
he bristles of this type of brush are charged with highl
age, work
uneven floors or those with dee
D HOLDER
er
T
e are two types of pad holder:
.
. The CENTRE LOCK type pad holder not only has anchor points, but also a snap-ty
allows the abrasive floor pad to be perfectly centred and held without any risk of it b
ype of bristles
∅
Bristles
∅
Brush
Length Notes
427602 0.6 WHITE
427605 0.3 LIGHT BLUE
427604
PPL
0.9 BLACK
Abila 2010 50 B-BT 1
427708 ABRASIVE
508 -
PAD HOLDER SELECTION TABLE
Machine No. Code Description
∅
Pad
Height Center Notes
Abila 2010 50B-BT 1 405542 PAD HOLDER D=500 500 61
30