Pioneer Eclipse PE320AS, Руководство по эксплуатации

Страница: 18 / 84

MACHINE PREPARATION
7. Close the recovery tank, rotating it by hand. Hold the recovery tank by the
8
9
1
he tank has a
To regulate the
DETERGENT W
handle only to avoid crushing your hands.
. Loosen the front cap of the solution tank.
. Check that the filter cover (3) beneath the solution tank is correctly closed.
0. Fill it with clean water at a temperature not exceeding 50
°
C. T
maximum capacity of about 48 litres.
water/detergent mixture, carefully read the “REGULATING THE
ITH THE CDS SYSTEM” paragraph.
ATTENTION: Protective gloves should always be worn before
handling detergents or acidic or alkaline solutions to avoid
serious injury to hands.
3
ed to always use low foam detergents.
Do not use pure acids or detergents with a stronger gradation
than that indicated on the label supplied.
ATTENTION: Always use detergents whose manufacturer's
label indicates their suitability for scrubbing machines. Do not
use acid or alkaline products or solvents without this indication.
In addition, you are advis
20.
For packaging reasons, the splash guard
the machine. To connect the rubber, remove the rubber-pressing blades and
unthread the spring hook (1) from the connection screw. Wind the rubber all
around the base, inserting the base fixing screw in the central hole. Reattach the
blades, starting from the centre of the base.
Be careful not to invert the right blade with the left one, as they are not the same.
ASSEMBLING THE SPLASHGUARD RUBBERS.
rubbers are supplied disassembled from
1
17