
16. ADJUSTING THE SQUEEGEE HEIGHT
The height of the squeegee must be adjusted on the basis of
ar of the rubb
do this, turn the knob (1) anticlockwise to raise the squeegee,
and clockwise to low
ted to the same level, so the
e
the state of wear and
te
er. To
er it.
Note:
The right and left wheels must be adjus
sque gee can work parallel to the floor.
17. RECOVERY
TANK
C
ctly closed.
heck the cap of the drainage tube (on the rear of the machine) is corre
, put a minimum quantity
of antifoam liquid in the recovery tank before starting to clean.
ATTENTION:
To avoid foam production
18. SOLUTION TANK / DETERGENT SOLUTION (VERSIONS WITHOUT DS)
Proceed as follows to fill the solution tank:
1. Turn the key of the master switch anticlockwise to the “OFF” position.
2. Engage the parking brake.
3. Remove the front inlet cap and check the solution filter (1) is correctly
assembled.
Check the filter cover (2) beneath the solution tank is correctly closed.
ceeding 50
°
C. You can check
4.
5. Fill it with clean water at a temperature not ex
the quantity in the tank by means of the rear tube (3).
2
2
15
Содержание PE320AS
Страница 1: ...Subtitle Title We help you shine A company of the Group Operation Manual PE320AS...
Страница 2: ......
Страница 76: ...CR11 KIT COP CARICABAT PE320AS 11 ASSEMBLY GRUPPE GRUPO GROUPE 10021810 AA 1 2 3 Pag 46 di 52...
Страница 83: ......