Pioneer Eclipse PE320AS, Руководство по эксплуатации

Страница: 29 / 84

3. THE MACHINE DOES NOT CLEAN WELL
1. heck the state of wear and tear of the brush and, if necessary, replace it (the brush
must be replaced when the bristles are about 15 mm long).
dirt is particularly resistant, we recommend the use of special brushes supplied
“CHOOSING AND USING THE
C
2. Use a different kind of brush to the one fitted as standard. For cleaning floors where
the
upon request and according to needs (see
BRUSHES”).
4. THE SQUEEGEE DOES NOT DRY PERFECTLY
Check the squeegee rubbers are clean. 1.
EIGHT” paragraph).
ry tank is not dirty and, if necessary, clean it
2. Adjust the inclination and height of the squeegee (see the “ADJUSTING THE
SQUEEGEE INCLINATION AND H
3. Check the suction tube is correctly inserted in its housing on the recovery tank.
4. Check the inner filter of the recove
thoroughly.
5. EXCESSIVE FOAM PRODUCTION
Check that a low foam detergent has been used. If necessary, add a small quantity of
antifoam liquid to the recovery tank.
emember that, when the floor is not very dirty, more foam is generated. In this case
the detergent solution should be more diluted.
R
6. ELECTRIC SYSTEM SAFETY (E versions)
ith manual reset, located in the rear part
of the machine near the main sw pressing the thermal
short space of time, you must
The machine is fitted with a thermal trip unit w
itch. The brush motor is reset by
trip unit button. If the machine stops repeatedly in a
contact the APEC technical assistance centre.
28