MACHINE PREPARATION
The solution tank has a maximum capacity of about 48 litres. Add the liquid
detergent to the tank in the concentration and manner indicated on the detergent
s label. The formation of excess foam could damage the suction
the minimum amount of detergent necessary.
manufacturer'
motor, so use only
ATTENTION:
Always use detergents whose manufacturer's
label indicates their suitability for scrubbing machines. Do not
use acid or alkaline products or solvents without this indication.
In addition, you are advised to always use low foam detergents.
Do not use pure acids.
ATTENTION:
Protective gloves should always be worn before
handling detergents or acidic or alkaline solutions to avoid
serious injury to hands.
19. SOLUTION TANK WITH AUTOMATIC CDS DISTRIBUTION SYSTEM
Proceed as follows to fill the solution tank:
1. Check that the key of the master switch is in the "OFF" position.
2
f the
3
4
5. Rotate the recovery
6
s
liquid leaking out while the machine is being used.
. Engage the parking brake, by means of the lever on the left side o
machine.
. Check the recovery tank is empty before you open it.
. Release the hinges (1) on the handlebars.
tank as far as it will go.
. Unscrew the cap (2) of the canister in the compartment (in front of the
batteries) and fill it with liquid detergent in the manner indicated on the label
upplied with the machine. Check the screw cap is well closed, to avoid any
1
2
16
Содержание PE320AS
Страница 1: ...Subtitle Title We help you shine A company of the Group Operation Manual PE320AS...
Страница 2: ......
Страница 76: ...CR11 KIT COP CARICABAT PE320AS 11 ASSEMBLY GRUPPE GRUPO GROUPE 10021810 AA 1 2 3 Pag 46 di 52...
Страница 83: ......