Pioneer Eclipse PE320AS, Руководство по эксплуатации

Страница: 15 / 84

MACHINE PREPARATION
14. ASSEMBLING THE SQUEEGEE
The squeegee, that for reasons of packaging comes disassembled from the
ceed as follows
1. FF” position.
2 f the machine.
3. he lever at the rear of the machine.
4 stud (1) in the hole in the squeegee
connection.
6 tud (2) in the slot on the squeegee connection.
7. he squeegee connection.
8. Insert the suction tube (3) in the appropriate sleeve on the squeegee, ensuring
that the suction tube lies to the right of the lifting cable.
machine, must be assembled while assembling the machine. Pro
for assembly:
Turn the key of the master switch anticlockwise to the “O
. Engage the parking brake located on the left side o
Lift the squeegee connection by means of t
. Lift the squeegee and fit the right
connection.
. Secure the stud by means of the pin on the squeegee 5
. Lift the squeegee and fit the left s
Secure the stud by means of the pin on t
A These operations must be carried out using
gloves to avoid any possible contact with the edges or
tips of metal objects.
TTENTION:
protective
1 EEGEE INCLINATION
D the rear rubber is tilted slightly backwards (by about 5
m s whole length. If it is necessary to increase the bend of
the rubber in the central part, you must tilt the squeegee backwards, rotating the
adjuster (4) anticlockwise. To increase the bend of the rubber at the sides of the
squeegee, rotate the set screw clockwise.
5. ADJUSTING THE SQU
uring working operation,
m) in a uniform way for it
1
2
3
4
14