Pinion C-Line C1.12, Руководство пользователя

Страница: 9 / 36

safety
9
rust-free (e.g. stainless) steel screws and add-ons (protection
plate, etc.) will cause corrosion on the gearbox housing.
Î –
use original pinion screws exclusively.
Î –
do not mount any stainless steel add-ons directly on the gearbox housing under
any circumstances.
… when on the road
Component failure may cause accidents.
Î –
before every ride make sure that the quick release system of your wheels is
correctly installed and that your wheels cannot be accidentally released.
Î –
before every ride make sure that your brakes are operating correctly and the brake
pads are not excessively worn.
Î –
before every ride make sure your chain or belt is correctly tensioned.
Î –
never exceed the maximum approved rider weight – see
teChnICal data
, page 6.
Î –
avoid jumping from a great height – this exposes your pinion gearbox to very high
load peaks.
Î –
never ride with your pinion gearbox if damage (to the gearbox housing, cranks,
etc.) is visible, unusual noises can be heard, or if you have any doubts the condi-
tion of the gearbox. have your pinion gearbox checked by a specialist workshop for
bicycles.
For a list of pinion dealers and specialist workshops, refer to
https://pinion.eu/en/
dealer-overwiew/ . For direct access scan the qr code – see
overvIew of dealers
,
page 32.
Î –
do not ride with your pinion gearbox below -20 °c (-4 °F) or above 40 °c (104 °F)
ambient temperature.
Incorrect riding behaviour or improper equipment may cause
accidents.
Î –
always obey the traffic regulations of the country where you are riding your bicycle
(lights, reflector, etc.) and also the regulations governing off-road mountain
biking.
Î –
always wear a good-quality, undamaged cycling helmet (e.g. ansi-certified) and
clothing that is close-fitting but does not hinder movement.
Î –
ride your bicycle only when you are in good physical condition and your bicycle
and all its components are in good condition.