Pinion C-Line C1.12, Руководство пользователя

Страница: 21 / 36

InstallatIon work
21
≈ 15 cm
20
Î Î
make sure that marks (11) on cable pulley and cable box ring line up.
•
•
cable pulley is located in the position for 1
st
gear.
•
•
right shifting cable (output 2.) projects about 15 cm further out of the cable box ring.
Î Î
make sure that both shifting cables are positioned correctly in the cable pulley guides (fig. 18) .
11
1,5 N·m (13 lbf·in) max.
2,5 mm
21
7
Î Î
put on cable box ring with cable pulley in the marked position.
Î
Î
tighten retaining screws (7) with a tightening torque of 1.5 n·m (13 lbf·in).
the shifting cables have a tendency to come unspliced on outer sleeve end caps
made from metal.
Î –
use outer sleeve end caps made from plastic (Ø 5.8 mm).
Î Î
insert the left shifting cable (output 1.) through the shifting cable outer sleeve.
Î Î
insert the right shifting cable (output 2.) through the shifting cable outer sleeve.
Î Î
make sure that both shifting cables are positioned correctly in the cable pulley guides (fig. 18) .