Pinion C-Line C1.12, Руководство пользователя

Страница: 26 / 36

InstallatIon work
26
rePlaCIng ChaIn rIng
www.pinion.eu
if you need to replace the chain ring of your pinion gearbox (because of wear, different
gear ratio, replacement by chain ring spider), you can order it with the required tools from one of the
pinion bicycle dealers.
another method of changing the gear ratio is to replace the sprocket on your rear
wheel.
chain ring, sprocket and chain always wear on opposite sides during use.
this means that the drive might stop working without problems (chain disengages, more noise) if only
one of these parts is replaced. we recommend always replacing all these parts if one needs replacing.
Î Î
unscrew central crank screw (1) .
Î Î
slacken both crank clamp screws (2) .
Î
Î
pull the crank from the input shaft.
10 N·m (89 lbf·in) max.
10 mm
6 N·m (53 lbf·in) max.
4 mm
31
1
2
2
2 N·m (18 lbf·in) max.
30
exChangIng Pulleys (PInIon ChaIn tensIoner)
Chain does not run smoothly, inaccurate chain line, accelerated wear.
Î –
use genuine pinion pulleys (p8592).