Pinion C-Line C1.12, Руководство пользователя

Страница: 15 / 36

MaIntenanCe
15
CLICK !
9
oIl Change
dispose of used lubricants and oils correctly and in accordance
with the applicable regulations – never dispose of waste in the sewage system or in the ground.
every 10 000 km (6 200 miles) or 1× each year, the oil in your pinion gearbox must be
changed.
use original pinion gearbox oil exclusively. Oil fill volume: 60 ml (2.0 oz).
in the 1
st
oil change of your pinion gearbox, the volume of drained oil will be less than
60 ml (2.0 oz) – nevertheless, comply with the fill volume that we specify!
the pinion oil service-set (p8903) enables you to extract used gearbox oil from the
gearbox quickly and cleanly.
Î Î
remove the cable box cover – do so by prying it off carefully in the area of the lugs using a flat-
blade screwdriver.
3 N·m (27 lbf·in) max.
3 mm
10
1
Î Î
place the bicycle or secure it in the repair stand so the drain opening is at the lowest point of your
pinion gearbox.
Î
Î
place a drainage tray underneath.
Î
Î
unscrew the screw plug (1) in the filler opening.
Î Î
unscrew the screw plug (2) from the drain opening.
Î
Î
drain used oil completely from the drain opening into the drainage tray.
Î
Î
screw the screw plug (2) into the drain opening and tighten with a tightening torque of 3 n·m
(27 lbf·in).
Î
Î
add fresh oil – oil fill volume: 60 ml (2.0 oz).
Î Î
screw the screw plug
(1)
into the filler opening and tighten with a tightening torque of 3 n·m
(27 lbf·in).
Î Î
put on cable box cover.
Î
Î
enter oil change date – see
oIl Change data
, page 35.
•
•
the oil change is complete.
2