Pinion C-Line C1.12, Руководство пользователя

Страница: 18 / 36

InstallatIon work
18
1,5 N·m (13 lbf·in) max.
2,5 mm
14
6
7
9
Î Î
remove the cable pulley (9) with the shifting cables from the cable box ring.
Î
Î
remove shifting cables from the cable pulley.
Î Î
thoroughly clean the cable pulley.
15
Î Î
remove the cable box cover (6) – do so by prying it off carefully in the area of the lugs using a
flat-blade screwdriver.
Î
Î
unscrew and remove the retaining screws (7) of the cable box – mark the holes used (position of
the cable box ring) with a waterproof pen or similar.
Î Î
remove cable box ring with cable pulley.
Î Î
thoroughly clean the cable box seat on the gearbox housing and apply corrosion protection
(e.g. protective wax).
Î Î
thoroughly clean planetary gears and sun gear and grease them liberally.
Î
Î
lightly grease sliding surface (8) of the cable pulley.
8