Pilz 750330, Руководство по эксплуатации

Страница: 4 / 99

Contents
Operating Manual PNOZ s30
1001715-EN-15
4
6.1.5.1 Connect rotary encoder to speed monitor 34
6.1.5.2 Connect rotary encoder with Z index to speed monitor 35
6.1.5.3 Connect rotary encoder to the speed monitor via an adapter 36
6.1.6 Connection of proximity switch and rotary encoder 36
6.1.7 Reset circuit 38
6.1.8 Feedback circuit 38
6.1.9 Select inputs 38
6.1.10 Semiconductor outputs 38
6.1.11 EMC-compliant wiring 39
6.2 Display menu - Configuration 42
6.2.1 Create configuration overview 42
6.2.2 Operate rotary knob 42
6.2.3 Configure Speed Monitor 43
6.2.4 Password protection 44
6.2.5 Use chip card 44
6.2.5.1 Insert chip card 45
6.2.5.2 Write data to chip card 46
6.2.5.3 Read data from chip card 46
6.2.5.4 Transfer device parameters 47
6.2.5.5 Duplicate chip card 47
6.2.6 Save configuration with Software SmartCardCommander 48
6.2.7 Menu overview 49
6.2.7.1 Permanent display 49
6.2.7.2 Basic settings Ini pnp pnp 50
6.2.7.3 Basic settings for the rotary encoder 51
6.2.7.4 Settings 53
6.2.7.5 Advanced settings 59
6.2.7.6 Information 60
6.2.8 Example: Configure basic configuration 2 64
Section 7 Operation 65
7.1 Display elements for device diagnostics 65
7.1.1 LEDs 65
7.1.2 Display 66
7.1.2.1 Error stack entries 66
7.1.2.2 Current error messages 66
7.1.2.3 Open circuit message 73
7.1.2.4 Frequency difference message on proximity switch 73
Section 8 Technical details 75
8.1 Safety characteristic data 80
Section 9 Supplementary data 81
9.1 Service life graph of output relays 81
9.2 Categories 82
9.2.1 Safety level 82
9.2.2 Safety functions 83