Commissioning
Operating Manual PNOZ s30
1001715-EN-15
34
npn proximity switch with resistor R = 47 kOhm
IN1
IN2
RJ45
6.1.5
Connection of a rotary encoder
Proceed as follows when connecting the encoder:
}
The encoder can be connected via an adapter (e.g. PNOZ msi6p) or directly to the
PNOZ s30.
}
Use only shielded cables for all connections. Please refer to the chapter entitled "EMC-
compliant wiring".
}
Always connect GND on the encoder to GND on the RJ45 connector.
6.1.5.1
Connect rotary encoder to speed monitor
Encoder types:
}
TTL single ended
}
HTL single ended
Please note:
}
Tracks/A, /B, Z and /Z must remain free
Encoder
RJ45
PNOZ s30
