_______________________________________________________________________________
7 of 19
Navod obsl OR 50(F)_2006-08-01_EN.doc
1. ENGINEERING
DATA
- Width of sharpened saw bands
20 – 50 mm
- Length of sharpened saw band
2 000 – 5 000 mm
- Saw band thickness
up to 2 mm
-
Tooth
pitch
8
-
30
mm
-
Manual
band
feed
5
teeth/min
-
Band
feed
by
motor 35
teeth/min
- Motor of grinding disk drive
0,25 kW/230V, 50Hz
- Motor of saw band drive
0,18 kW/230V, 50 Hz
- Cooling pump motor
0,09 kW/230V, 50 Hz
- Outside dimensions of grinding machine
750 x 750 x 350 mm
- Weight
33 kg
-Total
power
input
0,52
kW/230V,
50
Hz
- Grinding disk size
175 x 6 x 20 mm
1.1
Scope of Use
The machine is designed exclusively for the grinding of saw bands.
Any other use is considered as not adequate to the purpose. The manufacturer is not
responsible for damages due to such a use. The user himself has to bear the risk.
The use complying with the purpose includes also observing the operating instructions
and the check and maintenance conditions.
2. Installation
2.1 Space
Requirements
To obtain an optimal function and the maximum accuracy of grinding, it is recommended
to install the machine on a flat solid base, in a hall or under a shelter.
Recommendations / assumptions:
a) Allow for sufficient space for the ground band saw and its maintenance.
b) The workplace of the grinding machine and its operator must be even, clean, it must
endanger neither the operation nor the operator.
c) Provide for good lighting of the workplace.
Observe all standards and hygienic regulations in force for the arrangement of the
machines at the workplace.
The arrangement of the machines must exclude that other operators are put at risk.
