_______________________________________________________________________________
6 of 19
Navod obsl OR 50(F)_2006-08-01_EN.doc
Only electricians or persons instructed in electromechanical
work under the supervision of electrical specialists are
allowed to open the electric equipment housings and to work
on the electric equipment!
Caution! Danger of injury!
The grinding disk is not covered at the grinding point!
Never use the grinding machine when you are tired,
exhausted, under the influence of medicaments,
drugs
or
alcohol!
Protective shields may only be removed when the machine is disconnected from the
power supply and the grinding disk is at a standstill.
An emergency shutdown is done by the TOTAL STOP push-button.
For putting the machine into operation again, unlock the push-button by turning it
manually.
Manual cleaning, removal of waste (e.g. sawdust,
wood chips, bark) are not allowed during the machine
run and running down.
Observe all valid fire prevention rules.
A first-aid kit must be available at the workplace.
Use suitable working clothes, shoes and
appropriate
safety devices (goggles, protective gloves
)
-
remove loose parts of clothes, cover long hair
-
make sure that other persons are at least 5 m from the band saw
-
all people present at the site muse be made familiar with all safety rules
-
the safety rules must be provided on a visible place at site
-
keep hands at safe distance from the saw band; never adjust any saw band when the
motor is running. Switch off the motor securing it against restarting before you start
handling the saw band
