_______________________________________________________________________________
16 of 19
Navod obsl OR 50(F)_2006-08-01_EN.doc
5.
SETTING OF SHAPE OF TOOTH TO BE GROUND
Note: The standard setting of the grinding machine is a tooth pitch of 22 mm and the
WOOD-MIZER tooth profile.
The setting of grinding machine may be changed in three ways:
5.1 Tooth Shape Setting
Tooth Form Depth
Increase and/or decrease the tooth depth by moving the screw /8/ to another lever recess
/11/.
By moving to the left /when looking from the front/, the tooth depth increases, by moving to
the right, the tooth depth decreases and the steepness of the tooth back surface changes
at the same time.
deeper
identical
shallow
Tooth Pitch – Change of Feed Length
When the shifter /12/ eccentricity is changed, the elevation of the feeding mechanism
changes.
The elevation should be always bigger than the actual tooth pitch.
-
Loosen the feed elevation lock screw (27).
-
Turning the feed elevation setting screw (26), set the elevation to be bigger than the
tooth pitch. Loosening the screw, the elevation increases, tightening the screw, the
elevation decreases.
-
Secure the set elevation by tightening the screw (27).
33
