_______________________________________________________________________________
18 of 19
Navod obsl OR 50(F)_2006-08-01_EN.doc
8.
Using the screw /8/ (control of tooth material removal) and the screw /9/ (setting
screw of tooth face removal) and turning the crank /10/, set the tooth shape
copying.
Note: Turning the screw /8/
to the right – the grinding arms lowers
to the left – the grinding arm raises
Turning the screw /9/
to the right – the shifter shifts back
to the left – the shifter shifts forward
9.
If the tooth profile does not comply with the desired form, choose another lever
recess /11/ for the screw /8/. Should in spite of this the tooth contour not be copied,
it is necessary to change the tooth form. See item “Change of Tooth Form”.
optimum
10. Switch on the turning of the grinding wheel and correct the grinding setting by
means of the screws /8/ and /9/ while turning the crank /10/.
Caution:
The face surface should get less sharpening than the back
surface.
This is the basic rule for sharpening all kinds of teeth!