Pilot Communications PMAC735 Скачать руководство пользователя страница 9

Страница: 9 / 98

1.4 Characteristics

The main parameters and characteristics of PMAC735 are as follows:

◆

Up to the 31

harmonic.

◆

Accepting standard CT and PT inputs.

◆

The voltage that can be directly measured is up to 500 V (phase-phase).

◆

Achieving the class-1 measuring accuracy stipulated by IEC 62053, with bidirectional

four-quadrant energy values.

◆

High-accuracy measurement of current and voltage (0.1%) (typical situation).

◆

Measurement of THD and K factor.

◆

Build-in clock.

◆

Demand calculation and maximum recording.

◆

Large high-contrast LCD screen, easy for operating and setting with password lock.

◆

Revisable fixed value alarm and relay functions.

◆

RS485 communication, standard MODBUS protocol (extendible PROFIBUS port)

◆

Operating temperature: -20

℃

~ +60

℃

◆

One optional programmable 4-20 mA analog output.

◆

Multiple optional extendible modules, providing flexible on-site combinations.

◆

Optional SOE event log.

◆

Standard pluggable connecting terminals

，

facilitating on-site installation and maintenance.

◆

Maximum and minimum of instant measurement.

Содержание PMAC735



































































































Результаты поиска

Содержание PMAC735

Отзывы:

Pilot Communications PMAC735, Руководство по установке и эксплуатации, Страница: 9 / 98

Результаты поиска

Содержание PMAC735

Отзывы: