41
4.3 Setting
The setting procedure is as follow:
1.
Press the key
to display PROG.
Enter the correct password (the default password is 1).
■
CT primary side setting
1.
Press the key
until CT-PR appears;
2.
Press the key
, and the cursor appears;
3.
Press the key
to modify the value;
4.
Press the key
to confirm the new value,
and the cursor disappears.
CT primary side can be set 49,999
maximum.
■
CT secondary side setting
Press the key
until CT-SE appears;
Hardware factor cannot be set, just for read only.
5 or 1 is fixed as CT secondary side
Содержание PMAC735
Страница 7: ...7 1 1 Pictures of the main unit Side view Rear view 1 2 Picture of the extension module Rear view...
Страница 18: ...18 B Low voltage 3 phase 3 wire delta connection 3 CTs C Low voltage 3 phase 3 wire delta connection 2 CTs...
Страница 19: ...19 D High voltage 3 phase 4 wire star connection E High voltage 3 phase 3 wire delta connection 3 CTs...
Страница 32: ...32 4 2 7 Frequency Press the key once and you will see the frequency data S1 S2 S3 S4 RL1 RL2 RL3 RL4...