manualshive.com logo in svg

Pierce HUSKY 12 GPM, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Pierce HUSKY 12 GPM Скачать руководство пользователя страница 7

© 2017 Pierce Manufacturing Inc. All Rights Reserved.

Husky 12 Foam System

 

 /   v

FOREWORD

1.

Purpose of Manual

The information in this manual is for the operation and maintenance of Pierce Husky 12 Proportioning System. It is 
intended to serve as a guide to assist qualified operators and mechanics in the operation and maintenance of their 
vehicle.

Keep this manual with the vehicle at all times.

NOTE:

Some of the details of your vehicle’s design and construction may be unique to your department 
alone. For this reason, information contained in this manual may be generic at times. Questions on 
major inconsistencies between your vehicle’s configuration and the information contained in this 
manual should be directed to your Pierce Dealer or Sales Representative.

2.

Scope

This supplemental operator’s manual provides operating and maintenance instructions for Husky 12 Proportioning 
Systems on vehicles manufactured by Pierce Manufacturing Inc.

This manual provides information under the following headings:

Safety.

 Contains important safety information, requirements before placing a vehicle in service, and information on 

installing custom equipment and accessories.

General.

 Includes information and instructions on the operation of major systems, controls, and indicators.

Operation.

 Contains procedures on performing common operations.

Maintenance.

 Contains scheduled preventive maintenance checks and inspections.

Appendixes.

 Contains information obtained directly from vendors who supply major components found on this unit.

3.

Customer Assistance Information

Your satisfaction with your Pierce apparatus is important to your dealer and Pierce Manufacturing Inc. Normally, any 
question or concern you may have with your apparatus can be handled by your selling or servicing dealer. Your 
dealer has the facility, trained technicians, special tools, and up-to-date information to promptly address any issue 
that may arise. Pierce Manufacturing Inc. has empowered dealers to make decisions and repair vehicles, and they 
are eager to resolve your issues to your complete satisfaction. Should you encounter an issue with your Pierce 
apparatus that requires service, take the following steps:

Step 1.) Contact your authorized Pierce selling or servicing dealer. They will make the necessary arrangements to 
order the necessary parts and make the required repairs.

Step 2.) If they are not able to repair the problem to your satisfaction, discuss your concern with a member of dealer 
management. Normally, concerns can be quickly resolved at that level. If the matter has already been reviewed with 
the Sales, Service, or Parts Manager, contact the owner of the dealership or the General Manager.

Step 3.) If, after contacting a member of the dealership management, it appears your question or concern cannot be 
resolved by the dealership without further help, you may contact Pierce Manufacturing Inc. at 888-Y-PIERCE (888-
974-3723).

Содержание HUSKY 12 GPM













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды