Pierce HUSKY 12 GPM, Руководство по эксплуатации и техническому обслуживанию

Страница: 26 / 76

OPERATION
3-4 / Husky 12 Foam System
© 2017 Pierce Manufacturing Inc. All Rights Reserved.
3-1.5 Choosing a Foam Source
Figure 3-5: Choosing a Foam Source
1557B, 1558, 1559, 1560, 1553
NOTE: When ever there is a foam class change, the system will automatically flush the pump with water to
prevent mixing of foam types.
NOTE: If you highlight an alternate class of foam (Tank 1 Class A to Draft Class B) and press the ENTER
button, a new screen will be displayed giving the user a second chance to continue with the new
class of foam or revert back to the previous class of foam used.
1. While in the normal run screen, press the PAGE button to go to the MODE SELECT screen.
2. Use the green UP/DOWN arrows to highlight “Change Foam Source” from the menu.
3. Press the ENTER button which will bring you to the SELECT FOAM SOURCE screen.
NOTE: • If you highlight a currently used foam type (Tank 1 Class A to Draft Class A) and press the
ENTER button, you will be transferred back to the HOME screen with that source enabled.
• If you highlight an alternate class of foam (Tank 1 Class A to Draft Class B) and press the
ENTER button, a new screen will be displayed, giving the user a second chance to continue
with the new class of foam or revert back to the previous class of foam being used.
• Whenever there is a foam class change, the system will automatically flush the pump with
water to prevent mixing of foam types in the pump.
4. Use the UP/DOWN arrows to highlight the desired foam source and press ENTER.