manualshive.com logo in svg

Pierce HUSKY 12 GPM, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Pierce HUSKY 12 GPM Скачать руководство пользователя страница 43

© 2017 Pierce Manufacturing Inc. All Rights Reserved.

Husky 12 Foam System

 

 /  4-9

MAINTENANCE

4-6.2a

Tank Fill Enable/Disable

MODE SELECT 

→

 SETUP SELECTION 

→

 SETUP 

→

 TANK DEFAULTS

NOTE:

The tank fill option must be enabled in order for the option to work. In order for the option to work, 
the system must have the optional tank fill valve installed for a single tank system, the air diaphragm 
fill pump for dual tank systems, and shut off floats installed in the tank dome to actuate the automatic 
shutoff when the tank is full. 

Figure

 4-11:

   Tank Defaults Screen - Fill Enable/Disable

1571B

NOTE:

At any time, the user may press the PAGE button to exit this screen and return to the run mode 

screen.

1.

While in the TANK DEFAULTS screen, press ARROW UP or ARROW DOWN to select the desired selection. 
This may be either the Fill/Inject line or the Fill Tank line.

2.

Press the ENTER button to activate the selection. 

3.

Use the UP and DOWN arrows to toggle the available settings in the selected line.

4.

When the desired setting is reached, press ENTER to save the selection.

4-6.2b

Select Single or Dual Foam Tank System

MODE SELECT 

→

 SETUP SELECTION 

→

 SETUP 

→

 TANK DEFAULTS

NOTE:

In the set up mode there is a screen that allows the software to recognize that the truck has been 
configured with one or two foam tanks. If the single/dual tank selection is not correct, the system 
may not run as it is “searching” for the second tank valve that is not installed, or it may not recognize 
the alternate foam valve is there because it was set for a single tank system.

Figure

 4-12:

 

 Tank Defaults Single/Dual Tank Enable

1571C

1.

While in the TANK DEFAULTS screen, press ARROW UP or ARROW DOWN to select the desired selection 
(TANK 1 or TANK 2).

2.

Press ENTER to activate the line.

3.

Press ARROW UP or ARROW DOWN to toggle between YES and NO.

4.

Press ENTER to accept the selection.

 

Содержание HUSKY 12 GPM













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды