PIAGGIO Liberty 50 Catalyzed, Руководство по ремонту

Страница: 48 / 165

- Left-hand rotation view from pinion side.
- Connected to the engine by pinion and crown wheel on crankshaft, transmission side.
- Push-button control.
- Battery used for the test:12V-3,6Ah.
N.B.
THESE VALUES MUST BE MEASURED WITH A CHARGED BATTERY AND AFTER THE STARTER
HAS BEEN ROTATING FOR 30" UNDER CONDITIONS OF POINT 1
Ignition circuit
All the control operations of the system that require
the disconnection of cables (checks of the con-
nections and the devices making up the ignition
circuit) must be done with the engine off: if this is
not done, the controls might be irretrievably dam-
aged.
Stator check
- Using a tester, check the resistance between the
brown-earth and black-earth terminal.
N.B.
VALUES ARE STATED AT AMBIENT TEMPERATURE. A
CHECK WITH THE STATOR AT OPERATING TEMPERA-
TURE LEADS TO VALUES HIGHER THAN THOSE STATED.
Electric characteristic
Stator : Brown-earth
~ 170
Ω
(Pick-Up)
Stator : Black-earth
~ 1
Ω
(Stator)
Voltage regulator check
A malfunction in the voltage regulator might cause the following problems depending on the type of
fault:
1) Bulbs burned out (regulator in short circuit).
2) Malfunction of the lighting system and the electric starter (regulator interrupted).
3) Battery not recharging.
4) Turn indicators not working.
Electrical system
Liberty 50 Catalyzed
ELE SYS - 48