5 Installation
Q-632 Miniature Rotation Stage
MP129E
Version: 1.1.2
15
In this Chapter
General Notes on Installation ...................................................................................................... 15
Mounting the Q-632 onto an Underlying Surface and Connecting it to a Protective Earth
Conductor .................................................................................................................................... 16
Fixing the Load to the Q-632 ....................................................................................................... 19
Connecting the Q-632 to the Electronics ..................................................................................... 20
5.1
General Notes on Installation
NOTICE
Heating up of the Q-632 during operation!
The heat produced during operation of the Q-632 can affect your application.
Install the Q-632 so that the application is not impaired by the dissipated heat.
Ensure sufficient ventilation at the place of installation.
Make sure that the complete bottom side of the Q-632 is in contact with the surface on
which the Q-632 is mounted.
NOTICE
Unwanted changes in position when mounted vertically!
The motion platform could move unexpectedly if the load exceeds the rotation stage's drive
torque when the Q-632 is mounted vertically (e.g., due to pulling forces on the cable of the
load). Unwanted changes in the position of the motion platform can damage the drive, the
load or the surroundings.
Take suitable measures to make sure that the load is lower than the drive torque (p. 37)
when the rotation stage is mounted vertically, e.g., the cables connected to the load
should have sufficient strain relief.
NOTICE
Lubricants, dirt, condensation!
Dirt, oil, lubricants and condensation will render the motor/drive inoperable.
Keep the Q-632 free from lubricants.
Keep the Q-632 free from dirt and condensation.
5
Installation
