phytron MCC-1, Руководство пользователя

Страница: 46 / 54

phytron
45 MA 1249-A009 EN
7 Putting into Service and Test
7.1 Test the Communication between Controller and PC
1. Connect the serial interface of the PC to the controller (X5), see Chap. 1.2.
2. Connect the supply voltage PWR to the controller (X9). The LED should light green.
3. Set the Remote/Local switch to REMOTE.
4. Switch on the PC.
5. Install MiniLog-Comm program package delivered with the controller.
6. Select the required settings in MiniLog-Comm, menu item Options/Interface
parameters , and save them: Active COM, transmission protocol and baud rate.
The baud rate in the controller can be changed by clicking on
A d v a n c e d > >
and can be
saved by
Set!
.
Baud rates MCC-1
can be selected in menu item Options/Interface
parameters or by programming instruction
9600 38400
14400 57600
19200 115200
28800
Factory settings
Baud rate programming instruction :
IC p S nnn
IC Code: programming a baud rate
p Port number 1
S Write (Schreiben)
nnn Enter baud rate
Data format for transmission :
No Parity
1 Stopbit
8 Bit ASCII-Code
57600 Baud
All instruction strings must have the following format: STX Data ETX
Control characters: see ASCII table
The programming instructions are listed in the MiniLog programming manual.