phytron MCC-1, Руководство пользователя

Страница: 15 / 54

Manual MCC-1
MA 1249-A009 EN
14
2.2 Safety Instructions
i
The MCC-1 is designed for operating as a wall or rail mounting device.
An installation is only allowed, if the requirement of the EC Machine Directive and
EMC are conformed with. See chap. 1.6.
i
This product is used as a part of a complete system, therefore risk evaluations
must be made before the use of the product regarding the concrete application.
According to the results safety measures have to be taken and verified.
Personnel safety must be ensured by the concept of this complete system (e.g.
machine concept).
WARNING
Injury or damage by overvoltage!
The MCC-1 must only be operated in accordance with the protective measures in
chap. 3.
CAUTION
Risk of damage by false motor current setting!
In case of motor voltages > 24 V:
The controller must only be operated if the unit and the motor housing both are
connected to protective ground.
CAUTION
Risk of damage by not fixed cables!
Motor cables and motor supply cables should be fixed to the device by the cable
clamps at the front side.
DANGER
Danger of electric shock!
Be careful handling the X8 screw connectors.
As long as the power stage is connected to supply voltage, a hazardous voltage
level is present at these components, even if the motor is not wired. Up to 3
minutes after turning off the supply voltage, dangerous voltages may still exist at
the connectors.
The instrument setting (e. g. motor current) must only be done while separated
from the power supply with a special instrument.