Photron FASTCAM-APX RS, Техническое руководство

Страница: 86 / 173

FASTCAM-APX RS Hardware Manual
-84-
3.8.4. PARTITION MODE
The previous Subsection 3.8.2. Recording into Divided Sections shows how to record
when PARTITION MODE 1 is selected.
When PARTITION MODE 2 is selected, on the contrary, manual selection of ID is not
needed. The following describes how to record in PARTITION MODE 2 with the
number of partitions set to 10, for example:
1. In partition ID01, set the camera in READY status.
2. Send a trigger pulse to start recording.
3. Recording
ends.
4. ID is automatically changed to 02 and the camera is set in the status waiting for a
REC trigger. The camera is in the READY mode if it is in the START recording
mode and in the ENDLESS recording mode if it is in the CENTER, END or
MANUAL mode.
5. Send a REC trigger to start recording.
6. Recording
ends.
7. ID is automatically incremented to 03 and the camera is set in the status waiting for
a REC trigger.
8. The camera automatically repeats the above until it ends recording at ID10, and
the camera returns to the LIVE mode.
This operation saves the trouble of manually changing the ID and setting the camera in
the status waiting for a REC trigger, and is useful to record events in series
incrementing the ID number.
*Note: The above MODE 2 operation can only be used in the START, CENTER, END
or MANUAL recording mode.