Photron FASTCAM-APX RS, Техническое руководство

Страница: 59 / 173

FASTCAM-APX RS Hardware Manual
-57-
3.5.5. RANDOM Mode
In the RANDOM trigger mode, the camera records in its memory a preset number of
frames of images every time a trigger is given. This mode is useful to record images of
events that take place at an unpredictable timing with output of a trigger signal. The
number of frames to record at each trigger can be set any number from 1 (one) up to
the total number of available frames in the memory.
Setting Number of Frames for RANDOM Mode Recording
To operate the camera in the RANDOM trigger mode, you need to preset the number of
frames to record at each trigger. Follow the procedure below:
1. Press the MENU key on the keypad to display the menu list.
2. Use the U-D and L-R cursor keys on the keypad to move the cursor to [RANDOM
TRIGGER]. Press the ENTER key to select the menu.
3. The RANDOM TRIGGER menu appears as shown below. The number of frames
to record at each trigger is shown in the lower right area.
4. Now you can set the number of frames to record at each trigger by moving the
cursor with the U-D and L-R cursor keys as shown in the following figure on the
next page. Press the keys, left or right, to select a digit, and, up or down, to
increase or decrease the number in each digit as necessary.
↑
Increase
Number
Decrease
↓
← L Frame digit R →