Photron FASTCAM-APX RS, Техническое руководство

Страница: 131 / 173

FASTCAM-APX RS Hardware Manual
-129-
4.9. Switching between
NTSC / PAL Video Formats
The APX RS has a function that lets you switch the video display format between NTSC
and PAL to display images on the video screen.
Caution: You must have appropriate NTSC and PAL video monitors properly connected
in the system to change the video formats from NTSC to PAL, or other way around,
using this function. When you are currently operating in an NTSC setup, for example,
and if you inadvertently switch from NTSC to PAL without an appropriate PAL video
monitor connected in the system, you will not only lose image display on the current
NTSC video monitor, but also you will lose the ability to revert to NTSC operation by
simple keypad operation. In such a case, you must reset the whole system from the PC
control software.
The following describes how to switch the video format between NTSC and PAL.
1. Press the MENU key on the keypad to display the menu list.
2. Move the cursor by the U-D keys to select the NTSC/PAL menu.
3. The NTSC/PAL selection menu is now displayed on the video monitor screen.
4. Move the cursor by the U-D keys to select the NTSC or PAL menu. Press the
ENTER key to set the selection.
5. Press the MENU key to exit the menu.