Photron FASTCAM-APX RS, Техническое руководство

Страница: 15 / 173

FASTCAM-APX RS Hardware Manual
-13-
1.4. Precautions
Ambient Temperature
Photron FASTCAM-APX RS has been designed to work properly in an ambient
temperature range of 0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit), no
condensation.To use the system in ambient temperature of over 35 degrees Celeius a
special heet sink(optional) must be used.
Storage Temperature
The APX RS must be stored in a place with an ambient temperature range of -20 to +70
degrees Celsius (-4 to +158 degrees Fahrenheit), no condensation.
Transportation
Save the original carton the unit came in for future transportation. Do not transport the
unit under ambient temperature of below -20 degrees Celsius (-4 degrees Fahrenheit)
or above 70 degrees Celsius (+158 degrees Fahrenheit).
WARNING
This product is grounded through the power cord. This protective ground connection is
essential for safe operation of the equipment. Avoid electrical shock by plugging the
power cord into a properly wired power outlet. A loss of the protective grounding, for
any reason, could result in electrical shock. Use the proper power cord and insure that
it is in good condition.
FEDERAL COMMUNICATIONS COMMISSION STATEMENTS
WARNING: This equipment generates, uses and can radiate radio frequency energy
and if not installed and used in accordance with the instruction manual, may cause
interference to radio communications. It has been tested and found to comply with the
limits for a Class computing device pursuant to Subpart A of Part 15 of the FCC Rules
and VDE 0871 Class B which are designed to provide reasonable protection against
such interference when operated in a commercial environment. Operation of this
equipment in a residential area is likely to cause interference, in which case the user, at
the user’s own expense, will be required to take whatever measures may be required to
correct the interference.
This device complies with Part 15 of the FCC Rules and VDE 0871. Operation is
subject to the following two conditions: (1) this equipment may cause harmful
interference, and (2) this equipment must accept any interference received including
interference that may cause undesired operation.