Photron FASTCAM-APX RS, Техническое руководство, Страница: 43 / 173

FASTCAM-APX RS Hardware Manual
-41-
6. Remove the lens cap and make sure the corrected image is displayed on the
monitor screen.
3.1.2. Saving Calibrated Settings
The APX RS can save one pattern of black image data obtained through calibration.
Follow the below procedure to save a correction pattern.
1. Press the MENU key on the keypad to display the menu.
2. Use the U-D and L-R cursor keys to go to [CALIBRATE] and press the ENTER key
to select.
3. Use again the U-D and L-R cursor keys to go to [SAVE] and press the ENTER key
to save the calibration data.
Note: It may take tens of seconds to several minutes to save a set of calibration data of
black image.
3.1.3. Loading Calibrated Settings
The black image data saved in the APX RS system may be loaded for subsequent use
in the following manner.
1. Press the MENU key on the keypad to display the menu.
2. Use the U-D and L-R cursor keys to go to [CALIBRATE] and press the ENTER key
to select.
3. Use the U-D and L-R cursor keys to go to [LOAD] and press the ENTER key to
load.
4. The saved calibration data is read out from the camera memory and is reflected on
the displayed image.