Phoenix Geophysics MTU-TXC, Руководство пользователя

Страница: 23 / 34

17 Chapter 1
General techniques
17
Connecting to a current source or
receiver
Refer to the User Guide for the current source or
receiver you are using for instructions on connecting an
external timing drive. (Typically, you need only connect
the supplied cable to the
MAG
.
INPUT
connector of the
MTU-TXC and the
EXTERNAL DRIVE
connector of the
current source.)
Figure 1-7: T-3 external drive cable.
For example, to connect to the T-3 current source, use
the external drive cable shown in Figure 1-7.
Note that the end of the cable with the diamond-
pattern of larger pins connects to the T-3 and the other
end connects to the MTU-TXC.
Figure 1-8: The end of the cable with the diamond pattern of
larger pins connects to the T-3 current source.