Phoenix Geophysics MTU-TXC, Руководство пользователя

Страница: 18 / 34

12 Chapter 1
General techniques
12
To remove a protective cap:
• On the MTU-TXC, push on the cap and turn it
counterclockwise.
• On a cable end, hold the cap in one hand and with
the other hand, push the locking ring toward the
cap and turn the ring counterclockwise.
To make cable connections:
• Fit the cable end to the receiving connector and
turn the locking ring clockwise until it locks in place.
To disconnect a cable:
• Push the locking ring toward the connection and
turn the ring counterclockwise.
To keep connectors clean:
1. When a connection is made, always join the two
loose protective caps and lock them to each other.
2. When disconnecting equipment, always replace the
protective caps immediately and lock them in place.
Connecting a PC
A special cable is supplied to connect the PC parallel
port to the MTU-TXC.
Fig. 1-3: MTU ⁄ MTU-A to PC parallel port cable.
To connect a PC:
1. Fit the PC cable to the parallel port on your
computer.
2. Fit the other end of the cable to the
PARALLEL I
/
O
connector of the MTU-TXC as described on page 11.