Phoenix Geophysics MTU-TXC, Руководство пользователя

Страница: 17 / 34

11 Chapter 1
General techniques
11
• Verify the ECP port properties as described on
page 10.
• Verify that the parallel port is working properly by
connecting a printer (using a standard printer
cable) and printing a test document.
If your operating system is Windows XP and you
receive Error code 54, “ECP driver is not set up to use
an interrupt,” verify that the Port Settings will “Use any
interrupt assigned to the port.” (See step 5 on
page 10.)
General techniques
This section explains how to connect the GPS antenna,
the battery, and a PC to the MTU-TXC.
Handling locking-ring connectors
The PC and current source or receiver connections are
made with military-grade cylindrical bayonet-lock
connectors equipped with protective caps or locking
rings. Most of these caps can be joined together in
pairs to keep them clean while the equipment is in use.
Fig. 1-1: Military-grade cylindrical connector and cap.
The GPS antenna and battery connections are made
with similar but smaller locking connectors; the
instrument terminals have caps, but the cable ends do
not.
Fig. 1-2: GPS and Battery connectors.