manualshive.com logo in svg

Phoenix Contact 2700689, Руководство пользователя, Страница: 5 / 52

Поделиться
Скачать
Phoenix Contact 2700689 Скачать руководство пользователя страница 5

For your safety

8289_en_04

PHOENIX CONTACT

5 / 52

1

For  your  safety

Read this user manual carefully and keep it for future reference.

1.1

Identification of warning notes

1.2

Qualification of users

The use of products described in this user manual is oriented exclusively to electrically 

skilled persons or persons instructed by them. The users must be familiar with the relevant 

safety concepts of automation technology as well as applicable standards and other regu-

lations.

1.3

Product changes

Modifications to hardware and firmware of the device are not permitted.

Incorrect operation or modifications to the device can endanger your safety or damage the 

device. Do not repair the device yourself. If the device is defective, please contact 

Phoenix Contact.

This symbol indicates hazards that could lead to personal injury. 

There are three signal words indicating the severity of a potential injury.

DANGER

Indicates a hazard with a high risk level. If this hazardous situation is not 

avoided, it will result in death or serious injury.

WARNING

Indicates a hazard with a medium risk level. If this hazardous situation is not 

avoided, it could result in death or serious injury.

CAUTION

Indicates a hazard with a low risk level. If this hazardous situation is not avoided, 

it could result in minor or moderate injury.

This symbol together with the 

NOTE 

signal word warns the reader of actions 

that might cause property damage or a malfunction.

Here you will find additional information or detailed sources of information.

Содержание 2700689





















































Отзывы:

Нет отзывов