Phoenix Contact 2700689, Руководство пользователя, Страница: 25 / 52

Configuration and diagnostics
8289_en_04 PHOENIX CONTACT
25 / 52
– Static assignment
The switch can be accessed using the set IP address and does not send any kind of
requests for the receipt of IP parameters.
5.1.3.2 System
“Software Update” menu
This page is used to view or modify the parameters for a software update and to trigger the
update.
“Change Password” menu
Here, you can enter the existing password and then change it to a new one known only to
you. By default upon delivery, the password is “private” (please note that it is case-sensi-
tive). For security reasons, the input fields do not display your password, but instead
“*******” is displayed.
“Reboot” menu
To trigger a reboot via the web interface, enter a valid password. Save the configuration be-
forehand, so that configuration modifications are retained or can be activated via a restart.
It is not ensured that all existing configuration data will be retained after a firmware up-
date/downgrade. Therefore, please check the configuration settings or reset the device to
the default delivery settings.
NOTE: Device damage caused by voltage failure
A voltage failure during a firmware update can result in the destruction of the firmware on
the device.
The password must be between 8 and 64 characters long. Note that the password is al-
ways transferred via the network in unencrypted format.
Forgotten your password?
Call the Phoenix Contact phone number listed in the Appendix, making sure you have the
device serial number and MAC address to hand.