Phoenix Contact 2700689, Руководство пользователя, Страница: 45 / 52

Technical data and ordering data
8289_en_04 PHOENIX CONTACT
45 / 52
Connection medium Twisted pair cable with a conductor cross section of
0.14 mm
2
to 0.22 mm
2
Cable impedance 100 Ohm
Transmission speed 10/100 Mbps
Maximum network segment expansion 100 m
General properties of the fiberglass ports
Number 0, 2 or 3 (version)
Connection format SC-RJ sockets on the device
Data transmission rate 100 Mbps according to PROFINET standard
Wavelength 650 nm
Laser protection Class 1 according to DIN EN 60825-1
Minimum cable length 1 m
Transmission length including 3 dB system reserve 50 m polymer fiber with F-K 980/1000 230 dB/km at 10/100
Mbps, maximum
100 m HCS fiber with F-S 200/230 8 dB/km at 100 Mbps,
maximum
(Average) dynamic transmission power (fiber type) in link mode
Minimum -8.0 dBm (980/1000 µm)
(Average) dynamic receiver sensitivity (fiber type) in link mode
Minimum -23.0 dBm (980/1000 µm)
Optical overrange 1.0 dBm (980/1000 µm)
Ethernet interfaces [...]
Mechanical tests
Shock test according to IEC 60068-2-27 Operation:30g,
Half-sine shock pulse
Storage/transport: 30g,
Half-sine shock pulse
Vibration resistance according to IEC 60068-2-6 Operation/storage/transport: 5g, 5 Hz - 500 Hz
Free fall according to IEC 60068-2-32 1 m
Conformance with EMC directives
Developed according to IEC 61000-6-2
Noise emission according to EN 55022:1998
+ A1:2000 + A2:2003 (interference voltage)
Class A
Noise immunity according to EN 61000-4-2 (IEC 1000-4-2)
(ESD)
Contact discharge:
Air discharge:
Indirect discharge:
Requirements according to DIN EN 61000-6-2
Test intensity 3, criterion A
Test intensity 3, criterion A
Test intensity 3, criterion A
Noise immunity according to EN 61000-4-3 (IEC 1000-4-3)
(electromagnetic fields)
Requirements according to DIN EN 61000-6-2
Test intensity 3, criterion A