Phoenix Contact 2400184, Руководство пользователя

Страница: 9 / 16

VL PPC 3000
3386_en_C PHOENIX CONTACT
9/16
6 Interfaces
After mounting the VL PPC 3000, make any necessary
cable connections (see Figure 4).
The available connectors are:
– Ethernet (ETH): Two RJ45 connectors allow the
computer to communicate on a 10/100/1000Base-T
Ethernet network.
– Serial (COM): One serial port (D-SUB 9) allows
connection of serial devices. The port can be
configured to communicate on the RS-232, RS-422, or
RS-485 physical layer (see “Serial communication” on
page 10).
– PCI: Up to two optional slots are available for PCI cards
(see “Installing PCI cards” on page 12).
– USB (USB): USB devices connect using Type A
connectors. The VL PPC 3000 has four USB ports:
three ports operate on version 1.1/2.0 and one port on
version 3.0.
– DVI-D (DVI-D): This port connects the VL PPC 3000 to
an external display.
– DP++ (DP++): This port connects the VL PPC 3000 to
an external display. Adapters are available to convert to
other video signal types (see “Accessories” on page 2).
Figure 4 Interface ports and LEDs
Inclusion of the PCI slots must be made when the
product is ordered. Adding a PCI slot is not a field-
installable option.
X10:COM
ERROR RUN HDD PWR
X7:USB
X6:USB
X5:USB
X4:USB
X9:DP++
X8:DVI-D
X3:ETH X2:ETH
X1: PWR 24VDC
+ –
①
1 Power connector
2 RJ45 Ethernet ports
3 Mass storage tray
4 USB 2.0
5 USB 3.0
6 DVI-D port
7 DP++ port
8 CFast card slot
9 Configurable RS-232/422/485 serial port
10 RTC battery
11 Power switch
12 LEDs
13 Optional PCI slot 1
14 Optional PCI slot 2
② ③ ⑤ ④ ⑥ ⑦ ⑨
⑪
⑬ ⑫ ⑭
⑧ ⑩