VL PPC 3000
3386_en_C
PHOENIX CONTACT
8/16
Figure 1
Panel installation
1.
Cut a hole in the enclosure according to the dimensions
for the selected display.
Figure 2
Panel cut-out dimensions for displays
2.
From the front, push the VL PPC 3000 through the
opening. Ensure that the gasket is properly positioned
in the groove.
3.
From the rear, place the display clamps (1) in the slots
(2) on the display and slide the clamp to the right (see
Figure 3). Clamps must be used in every slot.
Figure 3
Panel mounting clamps
4.
Tighten the screws with a screwdriver on all clamps,
alternating from one side to the other until the front
bezel is secure against the panel. Torque the bolts to
1.2 Nm.
Display size
X (mm)
Y (mm)
12 in.
334.0
253.0
15 in.
386.6
285.6
17 in.
424.0
329.5
18.5 in.
488.0
292.0
19 in.
443.0
360.0
21.5 in.
553.0
328.0
24 in.
620.4
352.8
INSPIRING
INNO
VATIONS
Panel wall
VL PPC 3000
X
Y
①
②
