background image

© PHOENIX CONTACT 2015-09-29

3386_en_C

VL PPC 3000

Data sheet 

1

Description

The VL PPC 3000 is a configurable industrial computer 

platform that can be fitted with various display, processor, 

memory, and mass storage options. This large combination 

of options and convenient form factor allow the VL PPC 

3000 to be suitable for countless industrial applications. The 

robust modular design simplifies the manufacturing 

process, resulting in a high-quality product with fast product 

delivery times.

2

Features

Compact, rugged housing

Flexible mounting options

Wide variety of touch screen display sizes with or 

without a USB port

Removable hard-disk drive, solid-state drive and 

CFast

®

 data storage options

Two integrated 10/100/1000 Ethernet ports with 

independent MAC addresses

Up  to  16  GB  RAM

Two optional slots allow installation of PCI cards for 

direct connection to fieldbus networks or other 

applications

USB 2.0 and 3.0 ports

IP65 rating in front panel, IP20 rating in back

NOTE:

Circuit ground (0 V) and functional earth ground (FE) are connected. 

Make sure you always use the latest documentation. 

It can be downloaded at 

phoenixcontact.com

.

This document is valid for all products listed in the “Ordering data” on page 2.

A configurable industrial computer platform

Содержание 2400184

















Отзывы: