Phoenix Contact 1153079, Руководство по установке и запуску

Страница: 42 / 54

FL MGUARD 1000 product family
42 / 52
PHOENIX CONTACT 108413_en_06
5.1.3 Restoring the default settings
Applications
– The administrator password is not known. It is therefore no longer possible to log on to
the device.
– The device configuration, passwords and certificates are to be deleted securely and ir -
retrievably.
– The device is to be taken out of operation.
Result
– The current device configuration, passwords and certificates are deleted securely and
irretrievably.
– The device is reconfigured with the default setting.
5.1.4 Updating from SD card
Application
– The device is to be updated to a higher firmware version from an SD card, without ac -
cess to a management interface.
The device configuration, passwords and certificates are to remain unaltered.
Result
– The firmware of the device is updated to a higher version by means of the update file
stored on the SD card.
– The device configuration, passwords and certificates remain unaltered and are avail -
able after the device has been restarted.
Requirement
– A (single) valid update file signed by Phoenix Contact has to be stored on the first par -
tition of the SD card.
(If there is a second update file on the SD card, the smart mode function will be aborted;
the PF1–5 LEDs light up red).
– A downgrade from a higher to a lower firmware version is not possible and leads to the
smart mode function being aborted; the PF1–5 LEDs light up red.
Note
– After a successful firmware update, the PF1–5 LEDs all light up green.
– The device is not ready for operation and has to be restarted.