Phoenix Contact 1153079, Руководство по установке и запуску

Страница: 44 / 54

FL MGUARD 1000 product family
44 / 52
PHOENIX CONTACT 108413_en_06
5.2.4 Exiting smart mode
The only way to exit smart mode is by selecting and applying a smart mode function:
• smart mode function 1: smart mode is exited without applying changes. The device re -
starts.
• smart mode functions 2 to 4: The selected smart mode function is performed. After the
smart mode function has been completed successfully, the device has to be restarted.
5.2.5 LED indicator (smart mode)
Example “Restoring the default settings”
Table 5 - 2 LED indicator: Smart mode “Restore default settings”
Selected Is being executed Completed
successfully
Failed
The LED shows which
smart mode function has
been selected (see
Table 5 - 1 ).
Additionally, PF1–5 flash
green simultaneously
three times every four sec -
onds.
The smart mode function
is executed:
The firmware is written to
the device.
NOTE: An interruption in
the power supply can
damage the device!
Do not switch off the de -
vice!
Wait until the function has
been executed success -
fully.
The smart mode function
has been executed suc -
cessfully.
Restart the device.
In the event of an error, re -
start the device. If the error
persists, contact your sup -
port.
A severe error can also be
indicated by the “FAIL“
LED.
PF1
PF2
PF3
PF4
PF5
PF1
PF2
PF3
PF4
PF5
PF1
PF2
PF3
PF4
PF5 PF1
PF2
PF3
PF4
PF5